Coloring Templates

Aluminium Stencils for Floor and Pavement Marking

Parking lot stencils let you paint bay numbers, direction arrows and warning symbols on the ground quickly, neatly and identically every time. They are used in indoor and outdoor car parks, factories, warehouses, fuel stations and public areas. Ilgi Trafik makes its stencils from aluminium, which does not rust, so a cleaned stencil can be reused for years.

Symbols and Sizes

• Parking bay symbols: accessible parking, visitor, staff, parking, no parking and electric vehicle charging.
• Direction and traffic markings: straight, right and left arrows, two-way, stop, caution, slow down and 20 km/h speed limit.
• Pedestrian and workplace safety: walkway, pedestrians first, footprints, forklift, forklift route, assembly point and emergency exit.
• Bicycle symbols: bike parking, bike parking area and cycle lane.
• Hatching and numbers: zebra and chevron hatching stencils and number stencils.

Most stencils come in 50x50 cm and 100x100 cm. Number stencils are 25x50 and 50x100 cm, some bicycle stencils 50x100 and 100x200 cm, the staff stencil 20x100 cm and the pedestrians-first stencil is a two-piece 100x200 cm set.

How to Use a Stencil

The surface must be flat, dry and clean. Place the stencil and apply paint with a brush, roller, spray or line marking machine. For long-lasting results, use road marking paint or a floor paint designed for traffic areas. Cleaning the stencil with thinner after each use keeps the edges sharp for the next job.

Frequently Asked Questions

Which size should I choose? 50x50 cm works well inside parking bays and other areas seen from close up; 100x100 cm is better on driving lanes and large areas where symbols need to be read from a distance.

Can you make a stencil that is not listed? Yes. Contact our customer service with the design and size you need for your project.

Can the stencils be used on walls? Yes. The aluminium stencils can also be used to paint symbols on walls and columns.