Fast, Clean Lane Marking with Floor Tape
Adhesive floor marking tape lets you mark walkways, rack fronts, storage zones and vehicle lanes in factories, warehouses, workshops and indoor areas without paint. The tape is unrolled and applied straight to the floor, and because there is no drying time, the area is ready to use immediately.
Tape Types and Sizes
- 5 cm x 33 m floor marking tape: for walkways, rack fronts and waiting area boundaries.
- 10 cm x 33 m floor marking tape: for forklift and vehicle lanes that must be seen from a distance.
- Black adhesive tape (5 cm x 33 m): for clear boundary lines on light-coloured floors.
- Anti-slip tape (5 cm x 10 m): for stair treads, ramps and slippery crossings.
Application Tips
Sweep and wipe the floor, then let it dry completely, as dust, moisture and grease weaken adhesion. Mark the line first, lay the tape without stretching it and press it down along its full length. Cutting and butting the tape at corners and slightly rounding the ends helps stop edges lifting. Apply anti-slip tape along the full width of each step, close to the nosing.
Tape or Paint?
Floor tape is practical where layouts may change and quick application is needed, and it can be removed and re-laid. For permanent lanes under very heavy forklift traffic, floor line paint may last longer.
Frequently Asked Questions
Should I buy 5 cm or 10 cm tape? 5 cm is usually enough for walkways and rack fronts. For vehicle and forklift lanes that must be visible from afar, 10 cm tape stands out more.
Where is anti-slip tape used? On stair treads, ramps and crossings that can get wet, to reduce the risk of slipping.
Can floor tape be used outdoors? Floor marking tape performs best indoors on clean, dry floors. For outdoor and asphalt surfaces, road marking paint is the better solution.